The Lato system
by Benedini Associati: 

The simplicity and quality of the single plywood case with great versatility of finishes.

Designed by Benedini Associati in 2015, Lato is a complete program of containers able to satisfy the most different areas of taste, offering a great variety of finishes on the fronts of the drawers: from woods, to marbles, to leather, to lacquered colors. The containers surfaces, in marine plywood, can be also covered in wood in different essences, or lacquered.

The program is designed to be combined with either the countertop washbasins from the Agape collection, or with the Corian® or marble tops from the Ell program. The drawers have no handles and are equipped with a push-pull and soft-close system for opening and closing. The length of the compositions can be customized to the centimeter.

Lato is available in two heights: 40 or 20 cm.

Lato 40

case height 40 cm


Lato was designed for an easy compositional process. Everything starts with the case, to which other components will be added. First the optional holes, if an over-countertop washbasin is used, then, until the entire available length is filled, the modules with drawers and open compartments. One of these open compartments will also act as an adjustment element for compositions made to measure. For the 40 cm high case the components and their mutual relations are represented in the diagram below:

componenti%20rigo%20ita 01

Lato 40 components:

1. Case h 40 cm

Lato Cassa

Case height: 40 cm
Case lenghts: 80, 100, 120, 140, 160, 180, 200 cm

Made to measure lengths require the inclusion of at least one open shelf unit.

2. Holes for washbasins

Lato Foro

The holes are optional and necessary only if Lato is used as an under-basin container.

Thanks to its construction in phenolic plywood, it is possible to place the washbasins directly on the counter without the need of a countertop.

The holes ensure the compatibility of Lato with all the countertop washbasins in the Agape catalog.

In addition to the countertop washbasins, the Ell washbasin-countertops can also be used on the Lato compositions.

3. Drawers module h 40 cm

Lato Cassetti

Drawer module height: 40 cm
Lengths: 40, 60, 80, 100, 120 cm

The drawer modules are push-pull with soft-close mechanism.

The module cannot be equipped with the second drawer if used in the under sink position.

4. Open shelves h 40 cm

Lato Giorno

Module height: 40 cm
Lengths: to the centimeter,
from 21 to 60 cm

The insertion of the open compartment is necessary for out-of-module case lengths.

It is not possible to place the h 40 cm open module in the under sink position.

5. Drawer front panels

Lato Frontali

Front height: 40 cm
Lengths: 40, 60, 80, 100, 120 cm

Fronts without handles and available in a number of different finishes and materials.

Lato 20

case height 20 cm


Lato 20 mantiene la stessa impostazione compositiva della versione alta 40 cm. Partendo dalla cassa, a quest’ultima si aggiungono eventuali forature (per lavabi in appoggio), e poi, fino a riempire l’intera lunghezza disponibile, i moduli con cassetti ed i vani a giorno uno dei quali fungerà anche da elemento di aggiustaggio per composizioni fuori modulo. Nel caso di una cassa alta 20 cm cambia il trattamento del contenitore sottolavabo. I componenti e le loro relazioni reciproche sono rappresentate nello schema qui sotto:

Lato 20 maintains the same compositional principles of the 40 cm high version. Again, everything starts with the case, to which other components will be added. First the optional holes, if an over-countertop washbasin is used, then, until the entire available length is filled, the modules with drawers and open compartments. One of these open compartments will also act as an adjustment element for compositions made to measure.

In the case of a 20 cm high case, the open module needs to be used in the position under the basin(s). The components and their mutual relationships are represented in the diagram below:

componenti%20rigo%20ita 01

Lato 20 components:

1. Case h 20 cm

Lato20 Cassa

Case height: 20 cm
Case lenghts: 80, 100, 120, 140, 160, 180, 200 cm

Made to measure lengths require the inclusion of at least one open shelf unit.

2. Holes for washbasins

Lato Foro

The holes are optional and necessary only if Lato is used as an under-basin container.

Thanks to its construction in phenolic plywood, it is possible to place the washbasins directly on the counter without the need of a countertop.

The holes ensure the compatibility of Lato with all the countertop washbasins in the Agape catalog.

In addition to the countertop washbasins, the Ell washbasin-countertops can also be used on the Lato compositions.

3. Drawers module h 20 cm

Lato20 Cassetti

Drawer module height: 40 cm
Lengths: 40, 60, 80, 100, 120 cm

The drawer modules are push-pull with soft-close mechanism.

The module cannot be placed in the under wasbasin position.

4. Open shelves h 20 cm

Lato20 Giorno

Module height: 20 cm.
Available with lengths from 21 to 60 cm.

The open unit is necessary if the case length is customized on cm.

When place under the washbasin, the shelf will have a reduced depth and will feature an inspection panel.

5. Drawer front panels

Lato20 Frontali

Front height: 40 cm
Lengths: 40, 60, 80, 100, 120 cm

Fronts without handles and available in a number of different finishes and materials.

Downloads

.pdf (zip)

---

Assembly Instructions – Lato

.dxf (zip)

---

File 2D – Lato h.20

.dxf (zip)

---

File 2D – Lato h.40